How to determine the specifications of channel steel

The delivery length of channel steel can be divided into two types: fixed length and double length, and the tolerance value shall be specified in the corresponding standards. The length selection range of domestic channel steel is divided into three types based on different specifications: 5-12m, 5-19m, and 6-19m. The length selection range of imported channel steel is generally 6-15m.

How are stainless steel pipes classified?

Stainless steel pipes are divided into ordinary carbon steel pipes, high-quality carbon structural steel pipes, alloy structural pipes, alloy steel pipes, bearing steel pipes, stainless steel pipes, as well as bimetallic composite pipes, coated and coated pipes to save precious metals and meet special requirements. There are various types and uses of stainless steel pipes, with varying technical requirements and production methods. The current production of steel pipes has an outer diameter range of 0.1-450mm and a wall thickness range of 0.01-250mm. To distinguish its characteristics, steel pipes are usually classified according to the following method.

Discount SPCC Carbon Steel Plate: The Best Choice for Your Steel Needs

Steel is an essential material commonly used in various industries due to its durability, strength, and versatility. One of the most commonly used types of steel is carbon steel, which is known for its cost-effectiveness and excellent mechanical properties. Among the several types of carbon steel, Discount SPCC Carbon steel plate has gained popularity among industries because of its excellent properties and cost-effectiveness.

Preparation method of carbon steel pipe

The raw material of carbon steel pipe is round tube blank, which needs to be cut and processed by a cutting machine to form a billet with a length of about 1 meter, and then sent to the furnace for heating through a conveyor belt. The billet is fed into the furnace for heating, with a temperature of approximately 1200 degrees Celsius.

What are the inspection standards for color coated rolls

Inspect the appearance of the color coated roll, including the smoothness, color, and absence of obvious scratches, dents, bubbles, foreign objects, etc. on the coating surface. The appearance requirements should meet the product specifications and relevant national standards.

What is the material of carbon steel plate and what are its advantages and disadvantages

It is a type of steel with a carbon content lower than 2.11% and without intentionally adding metallic elements, and can also be called plain carbon steel or carbon steel. In addition to carbon, it also contains a small amount of elements such as silicon, manganese, sulfur, and phosphorus inside. The higher the carbon content, the better the hardness and strength, but the lower the plasticity.